SLAVENKO STOJADINOVIĆ
Assistant Professor

sstojadinovic@mas.bg.ac.rs
Date of birth: 22.6.1985. in Prijepolje
Present Position: Assistant Professor
Degrees:
2004 - 2009
Dipl.Ing., Mechanical Engineering Faculty, Production Engineering, University of Belgrade (GPA 9.47)
2009 - 2016
Ph.D. Studies, Mechanical Engineering Faculty, University of Belgrade
Scholarship:
2014 (two months)
Scholarship of the Scholarship Foundation of the Republic of Austria for Undergraduates, Graduates and Postgraduates (Ref. No.: ICM-2013-05391), Austrian Agency for International Cooperation in Education and Research (OeAD – GmbH), Study visit at Vienna University of Technology, Institute for Production Engineering and Laser Technology
2009 - 2010
Scholarship for the PhD study, Ministry of Education, Science and Technological Development of Republic of Serbia
2008 - 2009
Scholarship of the Fund for Young Talents, Ministry of Youth and Sports of Republic of Serbia
2008 - 2010
Foundation for young talents, Ministry of Science and Technological Development
Professional experiences:
2009
Student Vice Dean, Mechanical Engineering Faculty, University of Belgrade
2010 - 2016
Teaching Assistant, Mechanical Engineering Faculty, University of Belgrade
2012 - 2015
Secretary of the Department for Production Engineering
2016 - today
Assistant Professor, Mechanical Engineering Faculty, University of Belgrade
Teaching Experience:
2010 - today
QUALITY MANAGEMENT
MANUFACTURING AUTOMATION
MANUFACTURING TECHNOLOGIES AND METROLOGY
MANUFACTURING TECHNOLOGY
2016 - today
COORDINATE MEASURING MACHINES EXPERT SYSTEMS
Research work:
He is involved, as a researcher, in domestic project in the field of production engineering.

List of major publications:

  1. Stojadinovic, S., Majstorovic, V., Durakbasa, N., Sibalija, T., Towards an intelligent approach for CMM inspection planning of prismatic parts, Measurement, pp. 326–339, Volume 92, 2016, doi: 10.1016/j.measurement.2016.06.037 (ISSN 0263-2241).
  2. Stojadinovic, S., Majstorovic, V., Durakbasa, N., Sibalija, T., Ants Colony Optimization of the Measuring Path of Prismatic Parts on a CMM, Metrology and Measurement Systems, pp. 119-132, Volume 23, Number 1, 2016, doi: 10.1515/mms-2016-0011 (ISSN 0860-8292).
  3. Stojadinovic, S., Tanovic, Lj., Savicevic, S., Micro-cutting mechanisms in silicon nitride ceramics silinit R grinding, Journal of Chinese Society of Mechanical Engineers, pp. 291-297, Volume 36, Number 4, 2015, (ISSN 0257-9731) Chinese Society of Mechanical Engineers.
  4. Majstorovic, V., Stojadinovic, S., Durakbasa, Path planning for inspection prismatic parts on CMM as a part of cyber – phisical manufacturing metrology model, pp. 3-8, Proceedings in Manufacturing Systems, Vol. 11, No. 1, 2016, University POLITEHNICA of Bucharest (ISSN 2067-9238).
  5. Majstorovic, V., Stojadinovic, S., Sibalija, T., Development of a knowledge base for the planning of prismatic parts inspection on CMM, Acta IMEKO, pp. 10-17, Vol.4, No. 2, 2015, International Measurement Confederation (IMEKO) (ISSN: 2221-870X).
  6. Stojadinovic, S., Majstorovic, V., Developing engineering ontology for domain coordinate metrology, FME Transactions, pp. 249-255, Vol. 42, No. 3, 2014, Faculty of Mechanical Engineering, Belgrade, doi:10.5937/fmet1403249S (ISSN: 1451-2092).
  7. Stojadinovic, S., Majstorovic, V., Towards the development of feature - based ontology for inspection planning on CMM, Journal of Machine Engineering, pp. 89-98, Vol. 12, No. 1, 2012, Editorial Institute of the Wroclaw Board of Scientific Technical Societies Federation NOT (ISSN 1895-7595).
  8. Stojadinovic, S., Majstorovic, D. V., A feature – based path planning for inspection prismatic parts on CMM, XXI IMEKO World Congress “Measurement in Research and Industry”, Proceedings, ISBN 978-80-01-05793-3, pp. 1551-1556, Prague, Czech Republic, August 30th - September 4th, 2015, Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Measurement.
  9. Stojadinovic, S., Majstorovic, D. V., Аn algorithm for simulation CMM measuring path based on the CAD model, 8th International Working Conference ”Total Quality Management – Advanced and Intelligent Approaches”, Proceedings, ISBN 978-86-7083-859-8, pp. 63-68, Belgrade, Serbia, 1st – 5th June 2015, Faculty of Mechanical Engineering, Belgrade.
  10. Majstorovic V., Stojadinovic S., Research and development of knowledge base for inspection planning prismatic parts on CMM, 11th International Symposium on Measurement and Quality Control 2013, Proceedings, ISBN 978-16178-20199, pp.46–52, Cracow-Kielce, Poland, September 11-13, 2013, International Measurement Confederation (IMEKO).
  11. Stojadinovic, S., Majstorovic, D. V., Metrological primitives in production metrology – ontological approach, Proceedings, 34th International Conference on Production Engineering, Proceedings, ISBN 978-86-6055-019-6, pp. 29-30, Nis, Serbia, 28– 30th September 2011, University of Nis, Faculty of Mechanical Engineering in Nis.