СПИСАК РАДОВА

Списак радова објављених
у међународним часописима и у зборницима међународних конференција

  1. Milacic V, Glavonjic M, A Combined Method for the Technological Forecasting of Machine Tool Performance,  Annals of the CIRP, Vol. 28-1, 1979, pp. 293-296.
  2. Glavonjic M, Milacic V, A Practical Procedure for Conceptual Design and Testing of Machine Tool Structure, Robotics and Computer-Integrated Manufacturing, Vol. 4, No 3/4, 1988, pp. 317-333.
  3. Milutinovic D, Glavonjic M, Serial Link Measuring System-based Approach for testing and Control of Stewart Platform-based Machines, Fourth ECPD International Conference on Advanced Robotics, Intelligent Automation and Active Systems, Moscow, Proceedings, 1998, pp. 288-293.
  4. Milutinović D, Glavonjić M, Pose Measurement of Parallel Kinematic Machines with Serial Link Measuring System, in PARALLEL KINEMATIC MASHINES-Theoretical Aspects and Industrial Requirements, Eds. Boer, C.R, Molinari-Tosatti L. and Smith K.S, Springer-Verlag, 1999, pp. 189-203, ISBN 1-85233-613-7.
  5. Milutinovic D, Glavonjic M, Makino H, Parallel Kinematic Machines with Serial Link Measuring System, 30th International Symposium on Robotics, Tokyo, 1999, Proceedings, pp. 621-626.
  6. Milutinović D, Glavonjić M, Kvrgic V, Zivanovic S, A New 3-DOF Spatial Parallel Mechanism for Milling Machines with Long X Travel, CIRP Annals-Manufacturing Technology, Vol. 54-1, 2005, pp. 345-348.
  7. Glavonjic M, Milutinovic D, Zivanovic S, Bouzakis K, Mitsi S, Misopolinos L, Development of a Parallel Kinematic device Integrated into a 3-axis Milling centre, Proseedings 2nd International Conference on Manufacturing Engineering (ICMEN), Kassandra-Chalkidiki, Greece, 2005, pp. 351-361.
  8. Glavonjic M, Milutinovic D, Parallel structure milling machines with long X travel, Robotics and Computer-Integrated Manufacturing, Vol. 24-3, 2008, pp. 310-320.
  9. Milutinovic D, Glavonjic M, Zivanovic S, Dimic Z, Kvrgic V, Mini educational 3-axis parallel kinematic milling machine, Proceeding of 3rd International Conference on Manufacturing Engineering ICMEN and EUREKA Brokerage Event, Kallithea of Chalkidiki, Greece, 1-3 october, 2008, pp. 463-474.
  10. Glavonjic M, Milutinovic D, Zivanovic S, Functional simulator of 3-axis parallel kinematic milling machine, International Journal of Advanced Manufacturing Technology, Vol. 42, 2009, Issue 7-8,  pp. 813-821.
  11. Glavonjic M, Milutinovic D, Zivanovic S, Dimic Z, Kvrgic V, Desktop 3-axis parallel kinematic milling machine, International Journal of Advanced Manufacturing Technology, Vol. 46, 2010, Issue 1-4, pp. 51-60.
  12. Milutinovic D, Glavonjic M, Slavkovic N, Dimic Z, Zivanovic S, Kokotovic B, Tanovic Lj, Reconfigurable robotic machining system controlled and programmed in a machine tool manner, International Journal of Advanced Manufacturing Technology, Vol. 53, 2011, Issue 9-12, pp. 1217-1229.

Списак главних радова објављених на српском језику

  1. Главоњић М, Развој методологије пројектовања обрадног центра као флексибилне технолошке јединице, Магистарски рад, Универзитет у Београду, Машински факултет, 1979.
  2. Главоњић М, Истраживање и развој метода идентификације динамике обрадног центра, Докторска дисертација, Универзитет у Београду, Машински факултет, 1987.